CAN Display for Battery Powered Vehicles


The SmartView™ CAN-open Display is an extension of Sevcon's range of dashboard mounted display products for battery powered vehicles. This compact LCD gauge is fully compatible with any of the Sevcon CAN-based controllers.
 

  

Features
Sharp display - ease of reading
BDI bar graph
Programmable warning, cutout,
   empty and full levels.
Intelligent fault indication to aid
      troubleshooting
Powered from CAN bus
Optional backlit version
Sealed IP55 front face

 
View the SmartView brochure


Additional Features & Benefits
 

Battery state of charge
10 segment LCD bar graph. Battery discharge algorithm programmable through the Sevcon controller software.

Hour meter value: 99 999.9 h
6 digits, display accuracy 1/10 h. Specific icons for Key Switch, Traction or Pump motor corresponding counts and ”h“  symbol.

Fault Code: Fxxxxx
6 digits

Maintenance Monitor
Maintenance and Tool Icons with program-mable activation.

Vehicle Maintenance Feature
Ability to manage planned vehicle maintenance via a pre-alarm and using two user configurable tool icons.

 

  

 

 
        




       
     		 


General Specifications*

 Display type: Liquid Crystal Display (LCD)
 Numeral size: 5 mm
 Viewing angle: 180 degrees
 Housing: Plastic bevelled black chrome-plated bezel and glass front.
 Mounting:

U-clamp with plastic nuts
 Panel thickness 0.5 to 7.0 mm
 Back lit illumination: Optional, remotely controlled
 Operating voltage: 10 VDC to 14 VDC (reverse polarity protected)
 Current consumption: 20 mA max, (<100 mA with backlit option)
 Communications interface: CAN 2.0B passive up to 500k
 Input pin protection: Protected against connection to 60V and supply
 Transient protection +/- 250 V for 20 ms with 10 ms repeat on each input
 Ambient temperature: -30ºC to +50ºC
 Storage temperature: -40ºC to +85ºC
 Vibration / shock: SAEJ 1378
 Ingress of dust and water: IP65 (front only)
*For additional specifications please contact your Sevcon Representative.

Dimensions